The R-K LPR series low pressure fluid pressure regulator is designed to protect piping systems and equipment from pressure changes.
The adjustable screw and lock nut makes it easy to convert varying upstream pressure into accurate pre-set downstream pressure.
Outlet pressure should be adjusted in a closed loop system within a range of 5-50 PSI.
Provides excellant flow at low range settings.
Top entry and parallel inlet and outlet ports to facilitate installation and avoid piping problems/
This patented pressure reducing valve is designed to keep the stainless steel spring totally isolated from the fluid chamber insuring no metal contact with the fluid.
It is ideally suited for most harsh chemicals, and for systems that require additional pressure protection.
Upstream Pressure Vacuum to 150 PSIG
Regulated Pressure 5 to 50 PSIG
Material ValveBody PVC Type 1, Grade 1
Polypropylene
PVDF
Teflon
Seal EPDM
Viton(R)
Kalrez(R)
Temperature Range 0 F to 140 for PVC
0 F to 180 F for POLYPRO
0 F to 280 F for PVDF
0 F to 340 F for TEFLON
Valve ports 1/4" to 1" Valve FNPT
1.5" to 2" Valve MPT
All valves are fully ported
Mounting Method (4) 1/4" -20 tapped holes for
standard machine valve body.
(1/4" to 1.00")
(2) cut-out slots on molded
valve body (1/2" to 1.00")
Kalrez® and Viton® are registered trademarks of DuPont Dow Elastomers.
Order
Information
The chart below will specify R-K standard
valves regarding valve size, valve material, and seal material.
For special orders, please consult the factory for pricing
and delivery information.
