The R-K FTV series float valve is designed to provide maximum efficiency in controlling the liquid level in storage tanks. They can be installed by using a tank adapter directly through the tank wall or with simple piping over the top edge of the tank. The FTV will automatically keep your tank at desired level, preventing overflow by providing positive shutoff. Dynamic seal o-rings are teflon encapsulated viton for long life and trouble free operation. The reliability of this valve has been proven in thousands of installations invloving acids, caustics, plating solutions, clean and waste water
Operating Pressure 0 to 80 PSIG
Float Molded Polypropylene
(1/2"-3/4"-1" sizes)
Expanded Polyethylene
(1/4"-1 1/2"-2"-3"-4" sizes)
Material ValveBody PVC Type 1, Grade 1
Polypropylene
PVDF
Seal EPDM
Viton(R)
Kalrez(R)
Temperature Range 0 F to 140 for PVC
0 F to 180 F for POLYPRO
0 F to 280 F for PVDF
0 F to 340 F for TEFLON
Valve ports 1/4" to 1" Valve FNPT
1.5" to 2" Valve MPT
All valves are fully ported
Mounting Method (4) 1/4" -20 tapped holes for
standard machine valve body.
(1/4" to 1.00")
Kalrez® and Viton® are registered trademarks of DuPont Dow Elastomers.
Order
Information
The chart below will specify R-K standard
valves regarding valve size, valve material, and seal material.
For special orders, please consult the factory for pricing
and delivery information.
